Civil Engineering and Construction Management - BEng (Hons)
September 2021
Want to become a civil engineer with construction manager skills? Study our BEng (Hons) Civil Engineering and Construction Management at Birmingham City University....
96points required
Clearing 2021
There are places available on this course.
Two ways to apply now
Call us 0121 331 6777
Clearing hotline opens Tuesday 10 August
Studying with us in 2021/22
It is possible that the 2021/22 academic year may be affected by the ongoing disruption caused by the Covid-19 pandemic. Information about the arrangements the University has put in place for the 2021/22 academic year in response to Covid-19 and the emerging variants can be found here.
Should the impact of Covid-19 continue in subsequent years of your course, any additional and/or alternative arrangements put in place by the University in response will be in accordance with the latest government public health advice, pandemic-related/health and safety legislation, and the terms and conditions of the student contract.
- Level Undergraduate
- Study mode Full Time
- Location City Centre
- Award BEng (Hons)
- Start date September 2021
- Fees View course fees
- School School of Engineering and the Built Environment
- Faculty Faculty of Computing, Engineering and The Built Environment
Clearing 2021
Please note: the entry requirements listed below are relevant for main cycle applications and may not be applicable during Clearing.
Overview
Want to become a civil engineer with construction manager skills? Study our BEng (Hons) Civil Engineering and Construction Management at Birmingham City University.
The BEng (Hons) Civil Engineering and Construction Management course aims to develop graduates with a broad understanding of current technology and practice in civil engineering and construction management, covering the relevant aspects of civil infrastructure, systems, design, analysis, and construction management skills.
This course is designed to meet the requirements of relevant professional bodies, and will give your career in civil engineering and built environment. You will study in a simulated workplace environment. This experience, and our outstanding industry links, will give you a competitive edge, enabling you to progress to a successful career when you graduate.
You will also develop the key transferable skills that modern employers require, such as problem-solving, project planning, presentation and communication. Our strong links to industry enable you to apply your learning to problem-based scenarios, ensuring your intellectual and practical competencies are fully developed.
What's covered in this course?
The course will cover the wide range of Civil Engineering sub-disciplines (structural engineering, geotechnical engineering, civil engineering materials, and environmental engineering).
In addition the course covers different construction management aspects such as health and safety, sustainability, BIM, contracts, project management, and commercial technology. The curriculum is practice led and cultivates problem solving skills, improving communication through effective real-life project work, work experience, and cases.
Team working on real life scenarios develop professional competence and prepares students for employment opportunities and career development.
Why Choose Us?
- Professional placement option – Gain employability skills with the option of a professional placement.
- Study in the heart of the UK's second city - Some of the UK’s most exciting infrastructure projects such as HS2, are taking place right on our doorstep.
- Strong industry links - The course will enable you to apply your learning to problem-based scenarios, ensuring your intellectual and practical competencies are fully developed.
- A well-established provider - The faculty has a reputation as the West Midlands' chief hub of knowledge, technology and skills-transfer into industry. The course is supported by dedicated teaching staff and expert industry speakers.
- State-of-the-art course facilities - You will be based at our Millennium Point campus in City Centre, where our facilities have undergone a £6.5 million investment to provide you with the best learning experience.
- Travel Scholarships - Opportunities to secure funding to gain experience overseas. Read about travel scholarships here.
- We are an Autodesk Training Centre (ATC) -This national and international recognition will give you access to on-campus training by certified Autodesk instructors, providing you with digital skills that will be highly sought after by employers. Autodesk applications play an important part in supporting the digital transformation of Architecture, Engineering and Construction.
Entry Requirements
We accept a range of qualifications, the most popular of which are detailed below.
Essential Requirements
|
112 UCAS tariff points from A/AS Level |
||
| LEVEL 2 QUALIFICATIONS | ||
|---|---|---|
| GCSE |
|
|
| Irish Leaving Certificate (Ordinary Level) |
|
|
| Scottish Intermediate 2 |
|
|
| Scottish Credit Standard Grade |
|
|
| Scottish National 5 |
|
|
| Plus one of the following Level 3 (and above) Qualifications | ||
| A level and Advanced VCE |
|
|
| Access to HE Diploma |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advanced Welsh Baccalaureate - Skills Challenge Certificate (first teaching September 2015) |
|
|
|
Welsh Baccalaureate Advanced Diploma – Core (awarded until 2016) ESW/KS Combined component |
|
|
|
International Baccalaureate Diploma |
|
|
| Other qualifications | ||
| If you have a qualification that is not listed in the table please refer to our full entry requirements on UCAS. Further guidance on tariff points can be found on the UCAS website. |
||
Additional information for EU/International students
| Essential | ||
|---|---|---|
|
Please see your country page for further details on the equivalent qualifications we accept. In additional to the academic entry requirements listed above, international and EU students will also require the qualifications detailed in this table. |
||
| EU/Non-EU (International) Qualifications | ||
| IELTS |
6.0 overall with 5.5 minimum in all bands If you do not meet the required IELTS score, you may be eligible for one of our pre-sessional English courses. Please note that you must have a Secure English Language Test (SELT) to study on the pre-sessional English course. More information. |
|
| International Baccalaureate Diploma (or equivalent, including internationally accredited Foundation courses). |
1. For students who complete the full IB Diploma: a total of 14 points or above from three Higher Level Subjects. 2. Students who do not complete the IB Diploma will be considered on the basis of their IB Certificates. Students must have grade 5 in Maths (Standard Level) |
|
International students who cannot meet the direct entry requirements can begin their degree studies at Birmingham City University International College (BCUIC).
Additional Requirements
As part of the application process you will be invited to attend an applicant visit day where you will undertake a short one-to-one interview with an academic member of staff. This is your chance to show us how passionate you are about the subject and it will help us make a decision on your application.
This will provide you with more information about the School and your course. In addition, it will give you a chance to meet and our staff and students to gain a better understanding of what it is like to be a student here.
Fees & How to Apply
- UK students
- International students
Award: BEng (Hons)
Starting: Sep 2021
- Mode
- Duration
- Fees
- Full Time
- 3 years
- £9,250 per year
- Apply via Clearing
- Full Time
- 4 years with Professional Placement
- Show fees
- Apply via Clearing
- Study Year £9,250
- Placement Year £1,650
Professional Placement Fees
Full-Time courses with a Professional Placement incur a fee during the placement year. The costs for those years when you attend the university for study, and the cost for the placement year are shown here.
Award: BEng (Hons)
Starting: Sep 2021
- Mode
- Duration
- Fees
- Full Time
- 3 years
- £13,200 per year
- Full Time
- 4 years with Professional Placement
-
TBC
If you're unable to use the online form for any reason, you can complete our PDF application form and equal opportunities PDF form instead.
Places available to start in September 2021
If you'd like to start this course full-time this September, you can apply through Clearing.
International and part-time students can apply online as normal using the links above.
Want to start in September 2022?
You can apply via UCAS from September 2021.
Personal statement
UK / EU students are required to submit a personal statement as part of their application for this course.*
The personal statement gives you a crucial opportunity to say why you’re applying and why the institution should accept you.
Here are the key areas you’ll need to address:
Course choice
Why does this course appeal? What areas are of particular interest?
Career plans
If you have a specific career in mind, say how your chosen course will help you pursue this goal.
Work experience
Mention any work that is relevant to your subject, highlighting the skills and experience gained.
School or college experience
Highlight skills gained at school/college, eg summer schools or mentoring activities.
Non-accredited skills or achievement
eg Duke of Edinburgh Award, Young Enterprise scheme.
You should also mention your future plans – if you’re planning to take a year out, don't forget to give your reasons. Talk about any subjects you’re studying that don’t have a formal assessment and any sponsorships or placements you’ve applied for. And don't be scared to add in details about your social, sports or leisure interests.
Get more information on writing personal statements.
*Non-EU students are not required to submit a personal statement when applying for this course.
Course in Depth
Year one
In order to complete this course a student must successfully complete all the following CORE modules (totalling 120 credits).
20 credits
The module aims to provide the underpinning knowledge and problem solving skills in engineering science to enable you to progress to the next module in the theme, Engineering Principles II, and then on to the second year of a range of engineering degrees.
As the practical aspects of engineering science are delivered in another theme of the common first year, the Engineering Principles modules concentrate on the theoretical aspects. The subject material will be delivered in two coherent streams one of which contains predominantly mechanical science and the other contains predominantly electrical science.
20 credits
The module aims to provide the underpinning knowledge and problem solving skills in engineering science to enable you to progress to the second year of a wide range of engineering degrees.
As the practical aspects of engineering science are delivered in another theme of the common first year, the Engineering Principles modules concentrate on the theoretical aspects. The subject material will be delivered in two coherent streams one of which contains predominantly mechanical science and the other contains predominantly electrical science.
20 credits
Mathematics plays a key role in establishing and grounding the skills of an engineer, and the ability to communicate the ideas of engineering that are expected of an engineering graduates.
The primary aim of this module is to provide the fundamental mathematical knowledge and techniques needed in order to enable you to use and apply such mathematical techniques for the evaluation, analysis, modelling and solution of realistic engineering problems. Application of these data sets has to include their interpretation both to and from the mathematical language. In addition, this module will introduce students to mathematical modelling software package. This will be used to plot, annotate basic signals and write simple programs to compute mathematical problems.
This module will develop your ability to both work on and communicate engineering realities to a wider audience, at a professional standard.
20 credits
This module will focus on introducing and building on well-established techniques for mathematically modelling dynamic systems (systems of interest for engineering) for contextualised engineering applications. The module will include an introduction to sophisticated signal analysis technique, Fourier series which is used to transform time-domain signals into their frequency spectra. The module is structured to include a mixture of lectures, tutorials and PC-based laboratories. The lectures will formally introduce material, in tutorials students will work through questions with tutor. The PC laboratories will involve using mathematical modelling software packages to implement mathematical operations.
20 credits
This module explores how key ‘actors’, including professional bodies, landowners, developers, investors, politicians, members of the public, and the state, etc. influence the development of the built and natural environment.
Broader forces also influence development processes. This module, therefore, encourages you to explore how Politics, Economy, Society, Technology, Law and the Environment (PESTLE) all shape the built and natural environment. This module also offers an opportunity not only to look at past and current trends, but potential future trends that influence development, including significant issues such as governance, resource availability and climate change; and a chance to learn how development processes occur at different spatial scales and contexts.
20 credits
Digital construction is an integral component of contemporary design, development and maintenance of modern residential development. Building Information Modelling (BIM) technology is at the forefront of the progressive movement towards total digitalisation of the built environment.
Against this backdrop, this module aims to provide a foundation for you to successfully execute the BIM process, facilitate its adoption and achieve interdisciplinary integration on a single project that simulates a residential project.
Year two
In order to complete this course a student must successfully complete all the following CORE modules (totalling 120 credits).
20 credits
In accordance with the programme philosophy and aims, this module has been designed to enable students to use problem-based learning to understand the core principles of structural analysis as relating to buildings and other structures.
The module follows the Civil Engineering programme philosophy of developing the intellectual and practical competence of students in technical, economic and theoretical aspects of civil engineering. Similarly the learning and teaching philosophy incorporates learning through formal lectures including presentations, seminars, tutorials and problem based scenarios, backed up by visits to construction sites and exhibitions when appropriate. Learning is practice-based, knowledge applied, work related and includes project based activities.
20 credits
In accordance with the programme philosophy and aims, this module has been designed to enable you to use problem-based learning to understand the geological materials and effects of soil mechanics on Civil Engineering and relate it to information about the geotechnical tests and reports. It includes opportunities to complete laboratory tests to define certain properties of soils.
The module follows the Civil Engineering programme philosophy of developing your intellectual and practical competence in technical, theoretical and environmental aspects of civil engineering. Similarly the learning and teaching philosophy incorporates learning through formal lectures including, seminars, tutorials, laboratory tests and problem based scenarios. Learning is practice-based, knowledge applied and work related including project based activities.
20 credits
In accordance with the programme philosophy and aims, this module has been designed to enable students to use problem-based learning to understand the properties, behaviour, and uses of materials of Civil Engineering. The module follows the Civil Engineering programme philosophy of developing your intellectual and practical competence in technical, theoretical and environmental aspects of civil engineering.
The learning and teaching philosophy emphasises practical work. Laboratory activities consist a major part of the module, covering all common Civil Engineering materials. These are supplemented by seminars, group work activities, and problem-based scenarios. Students are encouraged to plan their own work schedules, manage their time and extend their presentational skills.
Built Environment Commercial Technology and Management 20 credits
20 credits
Building Information Modelling (BIM) is an intelligent 3D model-based process that provides built environment professionals with the insight and tools to help plan, design, construct, and manage buildings and infrastructure. In this module, you will be encouraged to explore the potential of BIM in helping to understand the social, economic and environmental benefits associated with co-ordinated infrastructure and complex structure development.
Year three
In order to complete this course a student must successfully complete all the following CORE modules (totalling 120 credits).
20 credits
This module will focus on extending and providing appropriate evidence of your professional skills and development. Within an applied socially responsive framework, you will examine a range of issues related to the client, the site, planning, financial/development appraisal, design technology, legal and regulatory, health and safety etc. These will be covered in conjunction with other professional courses or your own discipline as appropriate, given that all built environment professions and recent reports such as the Farrell Review place increasing stress on interdisciplinary understanding and working.
20 credits
In accordance with the programme philosophy and aims, this module has been designed to enable students to use problem-based learning to understand the Structural Design process and relate it to information previously learned in Structures 1 and Civil Engineering Materials.
The module covers both analytical and numerical modelling of structures in order to provide the background for the students to produce the structural design of a small building. The effect of loading combinations is addressed utilising the approach specified in British Standards and European Norms. Aspects of analytical modelling are considered for structural design to the Eurocodes, utilising the UK National Annexes, for the common structural materials. Numerical aspects are covered via the Finite Element Method (FEM) and related software.
20 credits
In accordance with the programme philosophy and aims, this module has been designed to enable students to use problem-based learning to understand the philosophy and application of a range of advanced methods employed in the analysis and design of Civil Engineering projects.
The module follows the Civil Engineering programme philosophy of developing the intellectual and practical competence of students in technical, economic, theoretical and environmental aspects of civil engineering. Similarly the learning and teaching philosophy incorporates learning through formal lectures, seminars, tutorials, and problem-based scenarios, backed up by guest speakers when appropriate.
40 credits
The purpose of the module is to enable you to undertake a sustained, in-depth and research-informed project exploring an area that is of personal interest to you. In agreement with your supervisor, you will decide upon your topic which will take the form of a practical outcome (artefact) with accompanying contextual material. The main consideration when choosing your topic is that it must be aligned to the programme you are studying, and you should consider the relevance of this topic to your future academic or professional development.
At this level, you will be expected to work independently but you will receive additional one-to-one support from your supervisor, who will be familiar with your chosen topic area. As you progress on the module, extra support will be available and this may take the form of group seminars, workshops and online materials that will help to develop your project.
20 credits
This module will provide you with a critical perspective on the nature, and a number of essential aspects of construction projects together with the approaches and techniques to manage them
The course combines innovative teaching with a stimulating workplace environment. You’ll be assessed through a mix of coursework, examinations, portfolio and presentations.
The way you are assessed is split into 50 per cent exams and 50 per cent coursework.
We will enhance your knowledge and understanding through formal lectures, presentations, seminars, tutorials, hands-on experience and problem-based scenarios. Guest speakers, as well as visits to construction sites, manufacturers and exhibitions, will give you valuable insight and experience of the industry.
You will be assessed through work-related learning and problem solving, in-class tasks, seminar work, peer assessment and learning sets, while summative assessment is provided in projects, presentations, time-controlled assignments and end examinations.
In your final year, you will conduct an individual project, where you will hone and enhance your organisational, research and time management skills.
Attendance requirements
For more information on attendance requirements, course contact time and suggested self-study hours, download the course specification.
Employability
Enhancing your employability skills
We will develop the skills, understandings and personal attributes that will help you stand out from the crowd when it comes to securing employment.
We will ensure you are professional, work-ready and enterprising, with a global outlook and the ability to solve problems creatively.
We will ensure you are professional, work-ready and enterprising, with a global outlook and the ability to solve problems creatively.
This course has been mapped against the UKSpec subject benchmarks for engineering, and we will support you to work towards a range of competencies linked to these benchmarks. We will also support your readiness for work by offering placements, where you can gain vital work experience in a real-life business.
Birmingham City University also has the Graduate+ scheme, an extracurricular programme which has been designed to hone the subject-based skills you develop throughout the programme alongside broader employability skills. You’ll develop skills in CV writing, presentations, a portfolio and more.
You could also gain work with OpportUNIty: Student Jobs on Campus, which ensures our students are given a first opportunity to fill many part-time temporary positions within the University. This allows you to work while you study with us, fitting the job around your course commitments. By taking part in the scheme, you will gain valuable experiences and employability skills, enhancing your prospects in the job market.
Placements
With the advantage of a construction site right on our doorstep as the University grows, students and graduates have benefited from placements and hands-on experience.
You will also benefit from the innovative Building Birmingham Scholarship programme. Launched by Birmingham City Council, it supports young people wishing to pursue a career in construction.
The Faculty has committed to ensuring that all students who would like to take out a third year in industry will be provided with that opportunity. This is not compulsory, but certainly is recommended since this can have positive implications for your future employability and sometimes even provides sponsorship.
OpportUNIty
OpportUNIty: Student Jobs on Campus ensures that our students are given a first opportunity to fill many part-time temporary positions within the University. This allows you to work while you study with us, fitting the job around your course commitments. By taking part in the scheme, you will gain valuable experiences and employability skills, enhancing your prospects in the job market.
It will also allow you to become more involved in University life by delivering, leading and supporting many aspects of the learning experience, from administration to research and mentoring roles.
International Students
Birmingham City University is a vibrant and multicultural university in the heart of a modern and diverse city. We welcome many international students every year – there are currently students from more than 80 countries among our student community.
The University is conveniently placed, with Birmingham International Airport nearby and first-rate transport connections to London and the rest of the UK.
Our international pages contain a wealth of information for international students who are considering applying to study here, including:
- Explore some of the good reasons why you should study here.
- Find out how to improve your language skills before starting your studies.
- Find all the information relevant to applicants from your country.
- Learn where to find financial support for your studies.
The UK remains one of the world's leading study destinations
The UK remains one of the world's leading study destinations for international students.
The first-class experience offered by universities are reflected in the world’s largest survey of international students. International students are more likely to recommend the UK than any other leading English-language study destination.
Facilities and Staff
Our Facilities
The School of the Built Environment provides the best possible equipment and facilities for all students. Our gallery below showcases the Built Environment’s learning spaces, civil engineering lab and state of the art computer aided design labs.
The facilities on offer to our students reflect the work environment you will enter as you start your career. We ensure that you are equipped to participate fully and possessed with the equipment needed to support your studies.
Computer Assisted Taking Off (CATO)
In offices today, much of the pen and paper approach to quantity surveying has been replaced by the use of specialised software systems. Here at Birmingham City University you will make use of commercial software as part of your assessment. Work is carried out in well-equipped and air-conditioned laboratories.
Computer Assisted Design (CAD)
You will be provided with the latest CAD software – free of charge – to enable you to acquire the skills you need in a modern design office.
Surveying equipment
Part of your learning activity will be hands-on, including carrying out survey work using a range of equipment, such as: Levels, Theodolites and Measuring tapes
Built Environment live sites
Birmingham is undergoing huge regeneration. One of the city's two new HS2 stations will be built right outside our City Centre campus and there will be many opportunities, now and in the future, for those with built environment qualifications.