Cookies and Privacy

The University uses cookies on this website to provide the best experience possible including delivering personalised content on this website, other websites and social media. By continuing to use the site you agree to this, or your can go to our cookie policy to learn more and manage your settings.

Publications

Find out more about the key publications produced by the Computational Modelling research centre.

Key publications

Sykes, Thomas C. and Castrejón-Pita, Alfonso A. and Castrejón-Pita, J. Rafael and Harbottle, David and Khatir, Zinedine and Thompson, Harvey M. and Wilson, Mark (2020) Surface jets and internal mixing during the coalescence of impacting and sessile droplets. Phys. Rev. Fluids, 5 (023602). ISSN 2469-990X

Sykes, Thomas C. and Castrejón-Pita, Alfonso A. and Castrejón-Pita, J. Rafael and Harbottle, David and Khatir, Zinedine and Thompson, Harvey M. and Wilson, Mark (2020) Surface jets and internal mixing during the coalescence of impacting and sessile droplets. Phys. Rev. Fluids, 5 (023602). ISSN 2469-990X

Salami, Mohammad R and Afsar Dizaj, Ebrahim and Kashani, Mohammad M (2019) The Behavior of Rectangular and Circular Reinforced Concrete Columns under Biaxial Multiple Excitation. Computer Modeling in Engineering and Sciences, 120 (3). pp. 677-691. ISSN 1526-1506

Bryngelson, Spencer and Guéniat, Florimond and Freund, Jon (2019) Irregular dynamics of cellular blood flow in a model microvessel. Physical Review E, 100 (012203). ISSN 2470-0045 Iyi

Fan, Y L and Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineeering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659

Etaig, Saleh and Hshem, Gamal and Hasan, R and Perera, Noel (2019) Investigation of the Heat Performance for Hyper Nanofluid in a Co-Current Shell and Tube Heat Exchanger. International Journal of Engineering Research & Technology (IJERT), 8 (12). ISSN 2278-0181

Perera, Noel (2019) Sustainable energy, engineering, materials and environment: current advances and challenges. Environmental Science and Pollution Research. ISSN 0944-1344

Draco and Hasan, Reaz (2019) Numerical Investigation of the Effect of Moisture on Buoyancy-driven Low Turbulence Flow in an Enclosed Cavity. International Journal of Heat and Mass Transfer, 136 (Jun-19). pp. 543-554. ISSN 0017-9310

Li, Tian and Hemida, Hassan and Zhang, Jiye and Rashidi, Mohammad and Flynn, Dominic (2018) Comparisons of Shear Stress Transport and Detached Eddy Simulations of the Flow Around Trains. Journal of Fluids Engineering, 140 (11). ISSN 0098-2202

Al-Neama, Ahmed F. and Khatir, Zinedine and Kapur, Nikkil and Summers, Johnathan and Thompson, Harvey M. (2018) An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120 (May 18). pp. 1213-1228. ISSN 0017-9310

Iyi, D. and Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127 (B). pp. 534-545. ISSN 0017-9310

Ramadan, Ahmed and Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds using well-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

Ioannidou, Vasiliki G. and Pearson, Jonathan M. (2018). Hydraulic & Design Parameters in Full-Scale Constructed Wetland & Treatment Units: Six Case Studies. Environmental Processes. pp. 1-18. ISSN 2198-7491

Kashani, Mohammad M and Salami, Mohammad R and Goda, Katsuichiro and Alexander, Nicholas A. (2018) Non-linear flexural behaviour of RC columns including bar buckling and fatigue degradation. Magazine of Concrete Research, 70 (5). pp. 231-247. ISSN 0024-9831

Issartel, Paul and Guéniat, Florimond and Isenberg, Tobias and Ammi, Mehdi (2017) Analysis of Locally Coupled 3D Manipulation Mappings Based on Mobile Device Motion. Presence: Teleoperators and Virtual Environments, 26 (1). pp. 66-95. ISSN 1054-7460

Zhu, Chunli and Hemida, Hassan and Flynn, Dominic and Baker, Chris and Liang, Xifeng and Zhou, Dan (2017) Numerical simulation of the slipstream and aeroacoustic field around a high-speed train. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (6). pp. 740-756. ISSN 0954-4097

Ozoemena, Matthew and Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of Technology Improvement Opportunities for a 1.5MW Wind Turbine using a Hybrid Stochastic Approach in Life Cycle Assessment. Renewable Energy, 93 (August). pp. 369-382. ISSN 0960-1481

Flynn, Dominic and Hemida, Hassan and Baker, Chris (2016) On the effect of crosswinds on the slipstream of a freight train and associated effects. Journal of Wind Engineering and Industrial Aerodynamics, 156 (Sep-16). pp. 14-28. ISSN 0167-6105

Guéniat, Florimond and Mathelin, Lionel and Yousuff Hussaini, M (2016) A statistical learning strategy for closed-loop control of fluid flows. Theoretical and Computational Fluid Dynamics, 30 (6). pp. 497-510. ISSN 0935-4964

Rahma, Elsiddig and Perera, Noel and Tan, Kian (2016) Impact of oil price shocks on Sudan's government budget. International Journal of Energy Economics and Policy, 6 (2). pp. 243-248. ISSN 2146-4553

Lim, Wen Zyn (2016) Fluid-structure interaction analysis of gravity-based structure (GBS) offshore platform with partitioned coupling method. Ocean Engineering, 114. pp. 1-9. ISSN 0029-8018

Vijay, Venkatesh Chennam and Lees, Mel and Chima, Parmjit and Chapman, Craig (2016) Augmented reality environment for engineering distance leaners to acquire practical skills. In: Remote Engineering and Virtual Instrumentation (REV), 2016 13th International Conference on. IEEE, pp. 215-223. ISBN 978-1-4673-8246-5

Khatir, Zinedine and Kubiak, K.J. and Jimack, P.K. and Mathia, T.G. (2016) Dropwise condensation heat transfer process optimisation on superhydrophobic surfaces using a multi-disciplinary approach. Applied Thermal Engineering, 106 (5/8/16). pp. 1337-1344. ISSN 1359-4311

Khatir, Zinedine and Taherkhani, Ali Reza and Paton, Joe and Thompson, Harvey and Kapur, Nik and Toropov, Vassili (2015) Energy thermal management in commercial bread-baking using a multi-objective optimisation framework. Applied Thermal Engineering, 80 (5/4/15). pp. 141-149. ISSN 1359-4311

Guéniat, Florimond and Mathelin, Lionel and Pastur, Luc (2015) A dynamic mode decomposition approach for large and arbitrarily sampled systems. Physics of Fluids, 27 (2). ISSN 1070-6631 0045

Iyi, Draco and Hasan, Reaz and Underwood, Chris and Penlington, Roger (2014) Double skin façade: Modelling technique and influence of venetian blinds on the airflow and heat transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311

Lu, Yiling and Li, Wei-Qi and Oraifige, I. and Wang, Wen (2014) Converging parallel plate flow chambers for studies on the effect of the spatial gradient of wall shear stress on endothelial cells. Journal of Biosciences and Medicines, 2. pp. 50-56. ISSN 2327-5081

Guéniat, Florimond and Pastur, Luc and Lusseyran, Francois (2014) Investigating mode competition and three-dimensional features from two-dimensional velocity fields in an open cavity flow by modal decompositions. Physics of Fluids, 26 (8). ISSN 1070-6631

Alhomoud, S.S. and Harmanto, D. and Oraifige, I. (2014) An investigation into the effect of Drag coefficient on overtaking of car. Applied Mechanics and Materials, 493. pp. 151-154.