course page main image

Chartered Surveyor Apprenticeship - BSc (Hons)

The Chartered Surveyor Apprenticeship will typically take 5 years to complete. It includes a BSc (Hons) degree qualification and qualification as a full chartered member of the Royal Institution of Chartered Surveyors (MRICS)....

  • Level Apprenticeship
  • Study mode Blended Learning
  • Award BSc (Hons)
  • Start date September 2022
  • School School of Engineering and the Built Environment
  • Faculty Faculty of Computing, Engineering and The Built Environment

Explore this course

Overview

The Chartered Surveyor Apprenticeship will typically take 5 years to complete. It includes a BSc (Hons) degree qualification and qualification as a full chartered member of the Royal Institution of Chartered Surveyors (MRICS). The apprenticeship is applicable to any employer undertaking any of the following roles:

  • Building Surveyors
  • Commercial Property Surveyors
  • Consultant (Professional) Quantity Surveyors

The above roles identify the surveying pathways for the apprenticeship.

The apprenticeship has been designed by an employer working group including employers of varying sizes representing the above surveying pathways and has also included the professional body for surveying, the Royal Institution of Chartered Surveyors. The assessment process has been designed to:

  • be relevant to the role of a chartered surveyor
  • provide a professional qualification
  • be widely recognised by the sector as a key route into the surveying profession

The apprenticeship will develop the technical, interpersonal and behavioural skills, knowledge and competence outcomes that are required for chartered surveyors to work effectively within a range of working environments.

Entry Requirements

We accept a range of qualifications, the most popular of which are detailed below.

Essential Requirements

112 UCAS tariff points from A/AS Level

LEVEL 2 QUALIFICATIONS
GCSE
  • GCSE English Language and Mathematics at grade C/4 or above
  • Equivalent level 2 qualifications can be accepted
  • Must have been achieved at the point of enrolment
Irish Leaving Certificate (Ordinary Level)
  • See level 3 entry under Irish Leaving Certificate for full details
Scottish Intermediate 2
  • English Language and Mathematics at grade C or above
  • Must have been achieved at the point of enrolment
Scottish Credit Standard Grade
  • English Language and Mathematics at grade 2 or above
  • Must have been achieved at the point of enrolment
Scottish National 5
  • English language and mathematics at grade C or above
  • Must have been achieved at the point of enrolment
Plus one of the following Level 3 (and above) Qualifications
A level and Advanced VCE
  • BBC / 112 UCAS points
  • Must include A-level mathematics at grade C or above
  • A maximum of 3 subjects are considered. These can be other A-levels or level 3 equivalents.
Access to HE Diploma
  • 60 credits overall. Minimum of 45 credits at level 3. Including 12 credits at Merit or Distinction with 9 in Mathematics and 3 in Science. The Access course must be in Engineering
  • Pearson BTEC National Extended Diploma
    (2016 – present)
  • Pearson BTEC Extended Diploma (QCF)
    (2010 - 2016)
  • BTEC Level 3 National Diploma
    (2002 – 2010)
  • DMM
  • Must be in Engineering
  • A minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians or Calculus unit is required
  • Pearson BTEC Level 3 National Diploma
    (2016 – present)
  • Pearson BTEC Diploma (QCF)
    (2010 – 2016)
  • BTEC Level 3 National Certificate
    (2002 – 2010)
  • 112 UCAS points
  • Considered with one A-level or an equivalent level 3 qualification
  • You must obtain EITHER a minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians or Calculus unit from a suitable level 3 qualification OR A Level mathematics must be achieved at grade C or above
  • Pearson BTEC National Foundation Diploma (2016 to present)

  • Pearson BTEC 90-Credit Diploma (QCF) (2010 - 2016)

  • 112 UCAS points
  • Considered with one A-level or an equivalent level 3 qualification
  • You must obtain EITHER a minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians or Calculus unit from a suitable level 3 qualification OR A Level mathematics must be achieved at grade C or above
  • Pearson BTEC Level 3 National Extended Certificate
    (2016 – present)

  • Pearson BTEC Subsidiary Diploma (QCF)
    (2010 - 2016)

  • BTEC Level 3 National Award
    (2002 - 2010)

  • 112 UCAS points
  • Considered with two A Levels or equivalent level 3 qualification(s)
  • You must obtain EITHER a minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians or Calculus unit from a suitable level 3 qualification OR A Level mathematics must be achieved at grade C or above

Advanced Welsh Baccalaureate - Skills Challenge Certificate (first teaching September 2015)

  • 112 UCAS points
  • Considered with one A-level or an equivalent level 3 qualification
  • You must obtain EITHER a minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians unit from a suitable level 3 qualification OR A Level mathematics must be achieved at grade C or above

Welsh Baccalaureate Advanced Diploma – Core (awarded until 2016) ESW/KS Combined component

  • 112 UCAS points
  • Considered with one A-level or an equivalent level 3 qualification
  • You must obtain EITHER a minimum of Distinction in Mathematics for Technicians unit or Merit in Further Mathematics for Technicians unit from a suitable level 3 qualification OR A Level mathematics must be achieved at grade C or above

International Baccalaureate Diploma

  • Obtain a minimum of 28 points overall and pass one of the following subjects from Group 4 at Higher Level

  • For students who do not already hold a GCSE in Mathematics at Grade C/4 or above grade 5 in Maths (Standard Level) from the IB Diploma will be accepted

  • For students who do not already hold a GCSE in English Language at Grade C/4 or above Standard Level English Language (not literature) English A - Grade 4 or above or English B - Grade 5 from the IB will be accepted.

Other qualifications
If you have a qualification that is not listed in the table please refer to our full entry requirements on UCAS.

Further guidance on tariff points can be found on the UCAS website.

Additional Requirements

As part of the application process you will be invited to attend an applicant visit day where you will undertake a short one-to-one interview with an academic member of staff. This is your chance to show us how passionate you are about the subject and it will help us make a decision on your application.

This will provide you with more information about the School and your course. In addition, it will give you a chance to meet and our staff and students to gain a better understanding of what it is like to be a student here.

 

What is a degree apprenticeship?

Higher and degree apprenticeships are an exciting new way to gain a recognised qualification while working full-time and gaining experience in the workplace. These courses are a high-quality alternative to a traditional university degree, combining a university education with workplace experience.

Degree Apprenticeships 

Apprenticeship Course Requirements

Level 4

In order to complete this apprenticeship a learner must successfully complete all the following CORE modules (totalling 120 credits):

Module NameCredit Value
Introduction to the Built Environment 20
Built Environment Technology 1 20
Law 20
Integrated Digital Design - Residential 20
Professional Environmental & Materials Science 20
Residential Quantification & Cost 20
Level 5

In order to complete this apprenticeship a learner must successfully complete all the following CORE modules (totalling 120 credits):

Module NameCredit Value
Procurement 20
Cost Management 20
Built Environment Commercial Technology 20
Integrated Digital Design for Complex Structures 20
Commercial Management 20
Commercial Quantification & Cost 20
Level 6

In order to complete this apprenticeship a learner must successfully complete all the following CORE modules (totalling 120 credits):

Module NameCredit Value
Contract Practice 20
Civils Quantification and Cost 20
Individual Honours Project 40
Project Management 20
Bid Strategy and Professional Practice 20
This course is not open to International students.

Apply through the employer

The first step is to apply directly to an employer who is advertising an apprenticeship position. Opportunities are advertised throughout the year on the Government’s apprenticeships database.

In order to apply for a degree apprenticeship with us, you must secure an apprenticeship job with an employer first. Once you have done this, your employer will send you to study with us.

If you are successful at securing an apprenticeship position, your employer will contact us and we will then invite you to apply for the course.

If you are an employer and interested in enrolling an employee on to this apprenticeship then please email CEBEapprenticeships@bcu.ac.uk for more information.

Apply through the employer

Studying with us during the Covid-19 pandemic

The University has put in place measures in response to Covid-19 to allow us to safely deliver our courses. Should the impact of the pandemic continue in future years, any additional or alternative arrangements put in place by the University will be in accordance with the latest government public health advice, health and safety legislation, and the terms and conditions of the student contract.

Facilities & Staff


Our Facilities

The School of the Built Environment provides the best possible equipment and facilities for all students. Our gallery below showcases the Built Environment’s learning spaces, civil engineering lab and state of the art computer aided design labs.

The facilities on offer to our students reflect the work environment you will enter as you start your career. We ensure that you are equipped to participate fully and possessed with the equipment needed to support your studies.

The facility our students value most is not actually on campus, but is the location of the campus in the heart of Birmingham’s Eastside opposite the new High Speed 2 station construction, and minutes from dozens of fascinating live projects within the city centre.

Birmingham as it changes constantly on our doorstep really is our ‘living lab’. By simply looking out the window of our classrooms you’ll be able to witness live projects as they’re happening around us. You’ll constantly be inspired by dozens of fascinating case studies just from walking from the station to the campus.

Software

Recognising the rapidly evolving digital built environment we are constantly reviewing software to best fit with the professions of the future.

Autodesk Accredited Centre Status, we use the latest integrated building modelling software across undergraduate courses, seeing Architectural Technology, Building Surveying, Construction Management, Property Development and Planning and Quantity Surveying students engaging in cross discipline information management projects modelling real life experience. Accredited Centre status allowing all students licence to download this software, and making available additional qualifications and certification to those demonstrating expertise and dedication to exploring their own and the limits of the Autodesk environment.

At course level, students engage with the latest and most appropriate software for their future professions. Real Estate students with CoStar, the leading industry database supporting valuations. Quantity Surveyors using Blue Beam, Revu and QS Pro, and along these Quantity Surveyors and Construction Managers use Synchro and Navisworks for 4D and CostX for 5D work. For Building Surveying and Architectural Technology routes, visualisation is important where Enscape, V-Ray Lumion and Sketch-up are available.

Built Environment Space in Millennium Point

The Built Environment Space in Millennium Point is available to all students with a huge resource of software-equipped laptops for loan on campus. For off campus working, much of the software we use comes with free student licences and all students will have access to the Windows Virtual Desktop, allowing access to our range of software from anywhere where the internet is available.

The Studio Space that we've created in Millennium Point is an open workspace where students can work on their design projects. We have all student work and examples that will change every week or month depending on what stage of a project we're at. And it's an open space for working on projects.

This is where our Architectural Technology students and our Building Surveying students in particular, spend a lot of their time.

Concrete and Hydraulics Labs

Our dedicated Civil Engineering facilities include a Hydraulics & Structures lab Concrete & Geotechnics lab as well as a bending rig.

The swollen concrete lab and hydraulics lab are the heart of our Civil Engineering course, where we have a range of test equipment. This is where our students can carry out experimental work as part of their course, either as part modules or using those labs to work on their final year project.